Festo CPV -VI Series Manual page 19

1. System overview
CPV valve ter- The CPV valve terminal with direct connection is avail-
minal with di- able with 8 valve plates. It can be connected directly to
rect connection the relevant fieldbus.
CPV valve ter- This CPV valve terminal is connected to the AS-i bus
minal with AS-i by means of a special AS-i cable. It is available with
connection four types of electrical connections:
– with additional supply connection for implementing an
– with additional supply connection and 4 inputs (not
– without additional supply connection.
– without additional supply connection and 4 inputs
The CPV valve terminals with AS-i connection can be
fitted with the following valve plates:
– two or four valve plates with 5/2-way single solenoid
– two valve plates with 5/2-way double solenoid valves
– two valve plates each with 3/2-way single solenoid
– two valve plates each with 2/2-way single solenoid
– Only CPV18: two valve plates with 5/3-way valves
PLEASE NOTE
The CPV valve terminal with AS-i connection and 4
inputs is always fitted with 4 valve locations. Depend-
ing on the equipment fitted, these CPV valve termi-
nals are filled, where necessary, with 1 or 2 reserve
plates.
CPV... 9811d
emergency stop function
CPV18)
(not CPV18)
valves
valves
valves
blocked in mid-position.
1-5