3. Installation
Basic installation
– Connecting
– Disconnecting
Connecting
Disconnecting
Fig. 3/1: Tubing variants
3-4
1. Push the tubing as far as it will go over the port
on the screw connector.
2. If necessary, pull the locking ring (A) over the
tubing connection and tighten clamping screw (B).
3. Group the tubing together for reasons of
clarity with:
- tubing connectors or
- multiple hose holders
1. Loosen the locking screw or locking ring of the
screw connector.
2. Pull the tubing out.
3. Replace non-required tubing with blind plugs (C).
(C)
(B)
(A)
CPV... 9811d