Fitting The Designation Support - Festo CPV -VI Series Manual

2. Fitting

2.3 Fitting the designation support

As a protection against unauthorized operation of the
manual override and for mounting the designation clips
for the valves, the CPV valve terminal has a designa-
tion support. This is fitted on the front above the ma-
nual override.
PLEASE NOTE
The designation support cannot be fitted onto CPV
valve terminals which are equipped with relay plates.
Proceed as follows:
• Clip the designation support into the grooves in the
left and right-hand end plates (see diagram).
Fig. 2/13: Fitting the designation support
• Press the designation clips into the recesses on the
designation support (see Fig. 2/13).
2-22
CPV... 9811d