Overview Of The Cpv-Sc Valve Terminal - Festo CPV-SC Series Manual

1. Summary of components
1.1

Overview of the CPV-SC valve terminal

1-4
Festo assists you in solving your automation task at the
machine level with valve terminals.
Due to their compact design, the CPV-SC valve terminals can
be fitted close to the actuators to be controlled. This enables
short compressed air tubing to be used. System losses will
therefore be minimized and the times required for pressuriz-
ing and exhausting the compressed air tubing will be redu-
ced. This is made possible by the use of very compact valves
with sufficient flow, thereby helping to reduce costs.
The valve terminal pneumatics provide the following:
– common channels for supply and exhaust air
– electric signals of all valve solenoid coils.
Work connections 2 and 4 are provided on the valve plates.
The valves are supplied with compressed air via the common
channels in the valve terminal and connections in the end
plates. The exhaust air (from the valves or pilot control) is
also vented via these connections. Further components are
also available as extras, e.g. for forming pressure zones or for
supplying the valve terminal with additional compressed air.
Festo P.BE-CPVSC-EN en 1206f