Festo CPV -VI Series Manual page 87

5. Maintenance and conversion
2. Loosening the pneumatic connections
• Individually wired CPV valve terminals (without pneu-
3. Loosening the CPV valve terminal from the mounting
– CPV valve terminals with pneumatic multiple con-
• Loosen the fastening screws of the pneumatic
– CP valve terminals with foot fastening
• Loosen the fastening screws in the right-hand end
– CP valve terminal fitted onto a wall or hat rail
• Loosen the right-hand wall fastening or hat rail
CPV... 9811d
matic multiple connector plate):
Loosen the work tubing of the valve plate which is to
be removed.
surface.
nector plate
multiple connector plate in the left and right-hand end
plates one turn in diagonally opposite sequence.
Then remove the screws completely. Now remove
the CPV valve terminal from the pneumatic multiple
connector plate.
plate and remove them.
clamping unit.
5-5