Festo CPV -VI Series Manual page 92

5. Maintenance and conversion
– With MP, AS-i or CP connections
PLEASE NOTE
The flat seals between the valve block and the con-
necting plate have been modifed. Replace the glued
flat seals if they are more than one year old. You
thereby guarantee reliable sealing on your CPV
valve terminal.
• The flat seals are seated at the bottom of the electri-
• Remove the self-adhesive flat seal from the recess.
Fig. 5/4: Position of the flat seal on the electrical
5-10
cal connector plate (see digram).
To do this, carefully loosen a corner of the seal (see
Fig. 5/4) with the aid of a screwdriver. Then carefully
pull the seal away from the electrical sub-base.
Flat seals
connector plate
CPV... 9811d