Festo CPV -VI Series Manual page 114

A. Technical appendix
Electrical components (CPV valve terminal with individual or CP connection)
Electromagnetic compatibility
of the CPV valve terminal with
CP connection
Interference emission:
Resistance to interference
Protection against electric shock
(protection against direct and indirect
contact as per EN 60204-1/IEC 204)
Relay plate
Operating voltage
Tolerance:
– CPV valve terminal with CP connection
– CPV valve terminal with IC connection
Power consumption at 21 V
Values in brackets for 24 V
CPV valve terminal all connection variants:
– per solenoid coilvalve
CPV valve terminal with CP connection:
– per relay plate
CPV valve terminal with IC connection:
– additional per individual connector plug
Input current consumption of
electronic components:
CPV valve terminal with CP connection
Load circuit data for relay outputs
(at 24 V + 10%)
Switching times of the relay outputs
(with normal voltage)
– pickup time
– drop-off tiime
PLEASE NOTE
Data on the electrical components of the CPV valve
terminal with multipin or AS-i connection is supplied
with the relevant product.
A-8
Tested as per EN 55011, limit value class B
Tested as per EN 50082–2
By means of PELV power units
(protected extra low voltage)
Consisting of 2 relays for controlling 2
electrically isolated outputs
24 V DC
20.4–26.4 V
18.0–26.4 V
CPV10 CPV14
0.46 W 0.65 W
(0,6 W) (0,85 W)
(1.2 W) (1.2 W)
≤ 0.26 W ≤ 0.26 W
20 mA
1 A ; Contacts floating
5 ms
2 ms
CPV18
1.16 W
(1.5 W)
---------
≤ 0.26 W
25 mA
CPV... 9811d