3. Installation
Connect the valve solenoid coils as follows:
• For current reduction, insert the intermediate plug
• Insert the socket into the connecting lugs of the ap-
Fig. 3/8: Fitting the sockets for individual connection
CPV... 9811d
into the connecting lug of the appropriate pilot sole-
noid.
propriate pilot solenoid or of the intermediate lug
(see diagram). The socket can be turned 180°. Make
sure that the centring bolt grips into the hole in the
socket between the connecting lugs. Fasten the
socket with the central locking screw (tightening
torque 0.3 Nm).
3-15