Table of Contents
Advertisement
2. Fitting
2. Mark the positions of the 4 holes for the fastening
Fastening type CPV..-VI-BG-ET200X
!
Connecting lug with centring bolt
"
109.5 mm
132 mm
Fig. 2/7: Dimensions for fitting onto the SIMATIC ET200X
3. Place the valve terminal carefully and without tilting
2-14
screws on the base (see diagram). Tip: Hold the
pneumatic interface module by the mounting surface
and mark the position of the holes. Drill the 4 holes
for M5 screws.
!
onto the pneumatic interface module. Make sure
that:
- the holes are placed over the centring bolts
- the connecting lugs are not bent.
Screw the valve terminal and the pneumatic inter-
face module with 4 screws onto the mounting sur-
face.
"
CPV... 9811d
Advertisement
Table of Contents
