Table of Contents
Advertisement
5. Maintenance and conversion
CPV valve terminals with MP, AS-i or CP connection
• • Loosen the 4 socket head screws of
• • Pull the connector plate carefully away from the con-
MP, AS-i or CP connector plate
• • Insert the connector plate onto the connecting lugs of
• • Fasten the connector plate with the 4 socket head
• • Tighten the screws in a diagonally opposite se-
IC connections
• • In the case of "F valve plates" (Ident. code F), insert
• • Insert the connector sockets onto the connecting lugs
• • Fasten the socket with the central locking screw.
CPV... 9811d
the connector plate.
necting lugs of the pilot solenoid coils.
the pilot solenoid coils.
screws.
quence.
the intermediate plugs for current reduction onto the
connecting lugs of the pilot solenoid coils.
of the pilot solenoid coils. Make sure that the guide
bolts grip into the connector socket.
5-23
Advertisement
Table of Contents
