Festo CPV -VI Series Manual page 42

2. Fitting
• Make sure that there is enough room to connect the
power cables and the pneumatic tubing.
• In the case of CPV terminals with IC connection, you
must insert the 4 socket head screws supplied into
the holes intended for this purpose on the left and
right-hand end plates (see diagram).
Socket head screws
!
Fig. 2/6: Position of fastening screws
• Screw the CPV valve terminal onto the fastening sur-
face or onto a support bracket.
2-12
CPV10
M4 x 45
!
M4 x 45 or M4 x 50 or M6 x 65 socket head screws
End plates
Fastening bracket
CPV14 CPV18
M4 x 50 M6 x 65
CPV... 9811d