Festo CPV -VI Series Manual page 35

2. Fitting
Proceed as follows:
• Make sure that the mounting surface can support the
• Fit the fastening profiles to the left and right hand
Valve Fitting variant: rear
terminal
Self-cutting screw Tightening torque
CPV10/14 M4 x 10
CPV18 M5 x 10
CPV... 9811d
weight of the CPV valve terminal.
end plates (see Fig. 2/2). Use the self-cutting screws
supplied for this purpose (see table). When fitting the
valve terminal from the rear, make sure that the fix-
ing bolts of the profile sections grip into the groove in
the end plates.
1.5 Nm
4 Nm
Fitting variant: front
Self-cutting screw Tightening torque
M3 x 18 1.5 Nm
---------- ----------
±
0.2 Nm
2-5