Protect (Protect Safe Configuration); Safety Subst Val (Substitute Values For Input Data From Safe Slaves) - Pepperl+Fuchs VBG-EN-K30-DMD-S16 Manual

Using this menu you can delete the safe configuration from a chip card bank. This
procedure is PIN protected.
9.5.8

PROTECT (protect safe configuration)

Main Menu|| AS-I SAFETY || PROTECT ||
This function allows you to protect the safe configuration before downloading
over the serial interface.
9.5.9

SAFETY SUBST VAL (Substitute values for input data from safe slaves)

Main menu || AS-I SAFETY || SAFETY SUBST VAL ||
When working with a double master (AS-i master and two AS-i circuits) the AS-i
circuit must be selected first by using the arrow and the OK buttons.
82
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
AS-i 3.0 EtherNet/IP Gateway with integrated Safety Monitor
STOP MONITOR
OK
START MONITOR
OK
PROTECT
ENTER PIN
0000
OK
AS-i CIRCUIT 1
AS-i CIRCUIT 2
SAFE SUBST VAL
SUBSTITUTE
CHANGE
Operation in advanced display mode
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com