Working With Sample Files - Pepperl+Fuchs VBG-EN-K30-DMD-S16 Manual

With a double click on the pictogram Processor you can begin with the down-
load.
12.1

Working with sample files

Please start the software RSLogix 5000.
Please open the file "F01_Module.ACD". This sample file contains a program
that shows you, how to use the command interface (mailbox).
If it is needed, please adjust your controller and the ip of your gateway.
Please look at the description of the controller tags, where you can find the
tag Mailbox1.
Here you can edit the command interface instructions. You can find an appropri-
ate description in the Mbx0Main routine in the Mailbox.
Further sample files:
F02_RD_RW.ACD, F03_Get_LAS.ACD, F04_READ_IDI.ACD,
F05_GET_DELTA.ACD, F06_GET_TECA.ACD,
F07_SET_LOS.ACD,
F09_GET_LCS.ACD,
F11_SafeDiagSort.ACD,
The task MainProgram of these examples shows, how to use some instructions
of the Command Interface with help of the task Mbx0Main.
DataExchange.ACD
This sample file contains a very simple program that shows you how to read and
write digital AS-interface inputs and outputs.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Appendix: the first commissioning with CompactLogix
F08_GET_LOS.ACD,
F10_GET_LPF.ACD,
F12_ACYCLIC_TRANS.
AS-Interface
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
135