Table of Contents
Advertisement
F2
PeripheryFault
F3
ConfigurationActive
ConfigError:
APF:
PeripheryFault:
ConfigurationActive:
Off-Line:
LOS-master-bit
16-bit value
15
14
2
2
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
16-bit data
Information!
A-slaves map the data on channels 1 and 2.
B-slaves map the data on channels 3 and 4.
In addition to the access via the command interfaces, the 16-bit data for or by the
slaves with 16-bit value can by exchanged cyclically (profile 7.3., S-7.4, S-6.0, S-
7.5, S-7.A.8, S-7.A.9, S-7.A.A). Competing writing access attemps on 16-bit out-
put data will not be blocked by every other. If 16-bit output data for a particular
slave are being transmitted both cyclically and acyclically with the command in-
terface, the acyclically transmitted values will be overwritten by the cyclically
transmitted values.
AS-i 16-bit data can be transmitted in a reserved data area. Therefore accessing
16-bit data is as easy as accessing digital data.
Byte
1
2
3
4
5
6
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Flags
0=ConfigOK
0=AS-i-Power OK
0=PeripheryOK
0=ConfigurationActive
0=On-Line
0=Off-Line by ConfigError
deactivated
13
12
11
2
2
2
2
7
6
5
2
2
2
slave 31 channel 1, low byte
slave 31, channel 1, high byte
slave 31, channel 2, low byte
slave 31, channel 2, high byte
slave 31 channel 3/slave 31B, channel 1, low byte
slave 31 channel 3/slave 31B, channel 1, high byte
→ ConfigurationMode
→ ProtectedMode
1=ConfigError
1=AS-i-Power Fail
1=PeripheryFault
1=ConfigurationInactive
1=Off-Line
1=Off-Line by ConfigError
activated.
16-bit value
10
9
8
7
6
2
2
2
2
16-bit data
4
3
2
2
AS-Interface
EtherNet/IP interface
Tab. 11-20.
5
4
3
2
1
2
2
2
2
2
2
1
2
2
Tab. 11-21.
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
0
2
0
2
125
Advertisement
Table of Contents
