Safe Data; Data Incompatible - Pepperl+Fuchs VBG-EN-K30-DMD-S16 Manual

Command
CHIP CARD>MASTER
MASTER->CHIPCARD
NEXT
The menu can be exited by pressing the ESC/Service key without changing the
data.
8.7.2

Safe data

This section describes the system behavior of the safe unit when using the chip
card.
In general the safe part of the chip card has 4 memory banks (A...D). A bank is
referred to as an active bank. Unless otherwise stated, the operations described
in the following are always performed on the active bank.
8.7.2.1

Data incompatible

If a card with incompatible data is found, the following error message is output:
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Function and startup of the Safety Monitor
CHIPCARD AND
AS-I DATA
DIFFERENT
CARD->MASTER
MASTER->CARD
CONTINUE
Description
Chip card data are copied to the master
Master data are copied to the chip card
No change to the data
CHIPCARD NOT
COMPATIBLE
AS-Interface
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
53