Table of Contents
Advertisement
This list contains entries for all AS-i slaves that were responsible for at least one
intermittent configuration error since the list was last read or since the AS-i mas-
ter was turned on.
empty field: no error
9.6.8
ERROR COUNTERS
Main Menu|| DIAGNOSIS || ERROR COUNTERS ||
This list displays the fault counter for each single AS-i slave.
In addition, the number of voltage dropouts/undervoltage on AS-i (APF) is dis-
played.
Selecting RESET resets the fault counter to 0.
Selecting OK on a slave address displays a list with additional information:
Information
NO SLV
NO SLV. TEL
SLV. TEL. ERR
PERIPH. FAULTS
PROTOCOL FAULT
94
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
AS-i 3.0 EtherNet/IP Gateway with integrated Safety Monitor
X: AS-i Slave triggered a configuration error.
ERROR COUNTERS
RESET
1A - 0
...
31A - 65535
1B - 34
...
30B - 0
SLAVE ADDR. 4A
NO SLV.:
NO SLV. TEL.:
31
SLV. TEL. ERR.:
PERIPH. FAULTS:
PROTOCOL FAULT:
error discription
frequency of slave failure
number of missing slave telegrams
number of slave telegram errors
number of peripheral faults
number of superior protocol faults (i.e. CTT2)
Operation in advanced display mode
5
1
2
1
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
Advertisement
Table of Contents
