9.5.3
SAFE COUPLING (optional menu)
Main menu || AS-I SAFETY || SAFE COUPLING ||
Information!
This menu is only displayed if there are no coupling slaves in the configuration.
nd
On the 2
ed which represent the states of the first two release circuits.
After entering the address (using the arrow keys) and confirming (with OK), the
display changes from ENABLE to DISABLE. Selecting DISABLE sets the address
to "00".
For additional information refer to <Safe coupling slaves on the AS-i circuits>.
9.5.4
START/STOP (changing the Monitor mode)
Main Menu || AS-I SAFETY || START/STOP ||
In this menu you change the mode of the Monitor.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
SAFE COUPLING
ON CHANNEL
<ADR
<DISABLE>
AS-i circuit up to two safe AS-i slaves (coupling slaves) can be creat-
SAFE COUPLING
ON CHANNEl
<ADR
<DISABLE>
START/STOP
ENTER PIN
0000
OK
START/STOP
STOP
CHANGE
START: Sets the Monitor to protecting operating mode
STOP: Sets the Monitor to configuration mode
Operation in advanced display mode
2
00>
2
10>
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
AS-Interface
73