Table of Contents
Advertisement
The grafical symbols indicate the state of the contacts:
Message Description
RR
RX
XR
Press the OK key to save the learned code table or press ESC to discard it.
9.5.1.3
COUPLING SLAVE
Main Menu || AS-I SAFETY || TEACH CODES || COUPLING SLAVE ||
This menu point allows you to teach the code table for a coupling slave. To con-
tinue, enter the PIN and confirm with OK.
In the following menu you select the AS-i circuit.
After selecting the AS-i circuit the safe unit switches to configuration mode.
Then enter the slave address.
The teach procedure was successful if after approx. 2 s an OK appears in the dis-
play.
Save with OK, or cancel the process by pressing ESC.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Both contacts open
Left contact open, right contact closed.
Right contact open, left contact closed.
TEACH CODES
ENTER PIN
0000
OK
AS-i CIRCUIT 1
AS-i CIRCUIT 2
COUPLING SLAVE
SLAVE ADDR.
ESC
COUPLING SLAVE
SLAVE ADDR.
ESC
Operation in advanced display mode
––1
––1
[OK]
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
AS-Interface
71
Advertisement
Table of Contents
