Switch-Off History; Password Protection; Procedure For Configuring And Teaching Code Sequences - Pepperl+Fuchs VBG-EN-K30-DMD-S16 Manual

Ethernet/ip gateway with integrated safety monitor
Table of Contents

Advertisement

AS-i Control Tools via diagnostic interface or Ethernet
The following diagnostics can be displayed (see section <INT MON (internal mo-
nitor)>):
Display of the switching state of the outputs
State ("color") of the devices and sub-devices
only half ("Category 2")
Error history for finding the cause of sporadic errors
8.4.1

Switch-off history

The switch-off history, accessible from the menu DIAGNOSTICS->INT MONI-
TOR->LAST DIAGNOSTIC, is intended to make reconstruction of the reason for
switch-off easier for the user. The states of all safety-relevant AS-i slaves and all
devices at the time the state change on the output device (change from green to
another color) are stored.
8.5

Password protection

All safety-related commands are password protected. These include:
Loading configurations into the Monitor
Stopping
Learning code sequences
Releasing
Changing the password
Information!
No new release is necessary if when using safety-configured AS-i slaves code
sequences have been newly learned using the ESC/Service key.
8.5.1

Procedure for configuring and teaching code sequences

The configuration is created using ASIMON 3 G2 software, loaded into the safety
unit and released. The name of the person releasing and the date are stored at
this moment. If code sequences controlled through the display are newly taught,
this is secured by a PIN to prevent unintended/unauthorized changing of the code
sequences.
Information!
For additional information see section<Replacing a defective safety-configured AS-i
slave>.
A PIN is a 4-digit number and can only be changed from the display, not via
the ASIMON 3 G2 software.
1. For the sake of better diagnostics thet procedure is being expanded using a Device/Device Color for adding diagnostics based
on AS-i addresses (sub-devices) and their states.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Function and startup of the Safety Monitor
1
; distinction when turning off
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
AS-Interface
49

Advertisement

Table of Contents
loading

Table of Contents