Table of Contents
Advertisement
Figure 66 Nutbar installation (Left nutbar shown)
Note
The nutbars are not interchangeable. There is a distinct nutbar for the left and right
side. Use part numbers for identification.
Procedure
1. At the front of the rack, align and install the left nutbar (051-000-357) directly
above the rail assembly.
2. Secure the nutbar with two M5 securing screws, one above the top alignment
pin and one below the lower alignment pin.
3. Repeat the previous steps for the right nutbar (051-000-356).
Shelf Installation and Removal
Shelf rail installation in non-EMC racks
73
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Domain DS60 and is the answer not in the manual?