EMC Data Domain DS60 Hardware Manual page 183

--------------
1
2
E(49-60)
D(37-48)
C(25-36)
B(13-24)
A( 1-12)
--------------
Legend State
------ -------------------
. In Use Disks
s Spare Disks
U Unknown Disks
- Not Installed Disks
------ -------------------
Total 34 disks
3. Add a capacity license for the new storage.
Note
, and systems can only be licensed through the Electronic Licensing and
Management System (ELMS). Refer to the applicable EMC Data Domain
Operating System Release Notes for the most up-to-date information on product
features, software updates, software compatibility guides, and information
about EMC products, licensing, and service.
Run the following command to add capacity to the active tier:
l
license add XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
# license add XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
Added " XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX " : CAPACITY-ACTIVE
feature for nn.n TiB capacity DS60
Run the following command to add capacity to the archive tier:
l
license add XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
# license add XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX
Added " XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX " : CAPACITY-ARCHIVE
feature for nn.n TiB capacity DS60
4. Add the storage to a tier.
Run the following command to add the storage to the active tier:
l
storage add tier active enclosure 2:2
# storage add tier active enclosure 2:2
Checking storage requirements...done
Adding enclosure 2:2 to the active tier...Enclosure 2:2
successfully added to the active tier.
Updating system information...done
Successfully added: 2:2
Run the following command to add the storage to the archive tier:
l
storage add tier archive enclosure 2:2
Checking storage requirements...done
Adding enclosure 2:2 to the active tier...Enclosure 2:2
successfully added to the archive tier.
Updating system information...done
Successfully added: 2:2
----------------------------------------------
. . . .
|--------|--------|--------|--------|
| Pack 1 | Pack 2 | Pack 3 | Pack 4 |
|. . s |U U U |-
|. . . |U U U |-
|. . . |U U U |-
|. . . |U U U |-
|. . . |U U U |-
|--------|--------|--------|--------|
----------------------------------------------
Count
-----
18
1
15
30
-----
done
done
Verify and configure the new storage
Adding Disks
- - |- - - |
- - |- - - |
- - |- - - |
- - |- - - |
- - |- - - |
183