Avaya J100 Series Installing And Administering page 99

- No: Does not detect the Avaya environment and switches to a non-Aura mode.
Note:
Disable the Avaya Environment configuration from the 46xxsettings.txt file.
• Reg. policy: Specifies the registration policy for SIP.
The two modes are as follows:
- Alternate: Supports registration to one of the active controllers.
- Simultaneous: Supports registration to both the active controllers.
• Failback policy: Specifies the fall back policy.
The two modes are as follows:
- Auto: Active controller automatically recovers after failback.
- Admin: Active controller uses failback policy defined by the administrator.
Note:
Failback policy is not supported on Third-party call control setup.
• Proxy policy: Specifies whether the settings of SIP proxy servers are taken from the
46xxsettings.txt file or can be edited by the user.
The two modes are as follows:
- Auto: The settings are taken from the 46xxsettings.txt file. The user can only
view the settings.
- Manual: The user can edit, delete, or create new server properties.
• User ID Field: Specifies whether during logging in the User ID field will be displayed on
the phone screen or not.
7. Select SIP proxy server to change SIP proxy server settings.
Caution:
Do not configure proxy settings manually while a user is logged in to the phone.
The phone displays the IP address of the server that you selected.
8. Press Details and use the Up and Down Arrow keys to view, add, or change the following
settings:
• Proxy: Specifies the IP address or DNS. The corresponding parameter is
SIP_CONTROLLER_LIST.
• Protocol: Specifies the type of protocol. The options are TCP or UDP. The
corresponding parameter is SIPSIGNAL.
• SIP Port: Specifies the SIP port. If no value is entered, SIP port uses 5060 as the
default port for UDP/TCP.
9. Press Save.
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
setup
Comments on this document? infodev@avaya.com
Configuring SIP settings
99