Avaya J100 Series Installing And Administering page 47

Software distribution package containing the files needed to operate the Avaya J100 Series IP
Phones are packaged together in a ZIP format. You can download the package from the
support website.
SIP software distribution package contains:
• One or more software files
• One upgrade file, J100Supgrade.txt.
• Language files. For example, Mlf_J129_BrazilianPortuguese.xml,
Mlf_J129_Chinese.xml.
• File named release.xml that is used by the Avaya Software Update Manager application.
Avaya Software Update Manager upgrades and maintains firmware for Avaya managed
devices.
Note:
You can configure a third-party root certificates by using the TRUSTCERTS parameter in the
46xxsettings.txt file. The supported file format is PEM.
Configuring the Settings file
About this task
Use this procedure to modify the Settings file with appropriate values to provision the device
configuration parameters.
Procedure
1. On the file server, go to the location where you downloaded the 46xxsettings.txt
Settings file.
2. Open the Settings file in a text editor.
3. Set the required parameters.
4. Save the Settings file.
Provisioning Server configuration
A file server is an HTTP or an HTTPS server that is required to download and save the software
distribution package and the settings file.
On restarting, the phone checks for software updates and settings files on the specified file
servers.
You can provide the file server addresses to phones through one of the following methods:
• DHCP
• LLDP
• Device interface
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
setup
Comments on this document? infodev@avaya.com
Phone installation
Avaya
47