Avaya J100 Series Installing And Administering page 145

Parameter name
L2QSIG
L2QVLAN
LANGUAGES
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
6
0
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Note:
This parameter can also be set
through:
• SET command in a settings file
• LLDP
Specifies the value of the VLAN
priority portion of the VLAN tag when
the phone generates tagged Ethernet
frames from the internal CPU of the
phone. These values are inserted into
the VLAN tag for signaling frames
(SIP). All other frames except those
specified by the L2QAUD parameter
are set to priority 0.
Valid values are 0 through 7.
Note:
This parameter can also be set
through:
• SET command in a settings file
• LLDP
Specifies the voice VLAN ID to be
used by IP phones.
Valid values are 0 through 4094.
Note:
This parameter can also be set
through:
• Local admin procedure
• A name equal to value pair in
DHCPACK message
• SET command in a settings file
• DHCP option 43
• LLDP
Specifies the language files that must
installed or downloaded to the phone.
Filenames can be full URL, relative
pathname, or filename.
Table continues...
145