Avaya J100 Series Installing And Administering page 77

Name
SIP Proxy Server (Manual)
SIP Proxy Server
(Automatic)
Registration Interval
Un-registration Wait Timer
(seconds)
Registration Wait Timer
(seconds)
Codecs and DTMF
G.722
G.726
G.729
G.711u law
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• Automatic: To use the SIP proxy server settings received from the
46xxsettings.txt file .
Specifies the SIP proxy server domain.
Valid values are 0 to 255 ASCII characters.
Specifies the SIP proxy server settings as received from the
46xxsettings.txt file .
Specifies the time interval between two registrations to the SIP proxy.
The default value is 900 seconds.
Valid values are from 30 to 86400 seconds.
Specifies the time for which the phone waits before terminating all SIP
dialog and SIP registrations.
The default value is 32 seconds.
Valid values are from 4 to 3600 seconds.
Specifies the number of seconds the phone waits for a response message
from registration. If no response message is received within this time, the
phone tries to register again.
The default value is 32 seconds.
Valid values are from 4 to 3600 seconds.
Specifies whether the G.722 codec is enabled.
The options are:
• Disable
• Enable
Specifies whether the G.726 codec is enabled.
The options are:
• Disable
• Enable
Specifies whether the G.729A codec is enabled.
The options are:
• Disable
• Enable
Specifies whether the G.711u law codec is enabled.
The options are:
• Disable
• Enable
setup
Comments on this document? infodev@avaya.com
Configuring SIP settings
Table continues...
77