Avaya J100 Series Installing And Administering page 160

Appendix
Parameter name
R
RECORDINGTONE
RECORDINGTONE_INTERVAL
RECORDINGTONE_VOLUME
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
15
0
setup
Comments on this document? infodev@avaya.com
Description
5: Packet loss is > 2% or round trip
network delay is > 480ms or jitter
compensation delay is > 100ms
6: Packet loss is > 1% or round trip
network delay is > 400ms or jitter
compensation delay is > 80ms
Specifies whether call recording tone
is generated on active calls.
Value Operation
• 0: Call recording tone is not
generated (default).
• 1: Call recording tone is not
generated.
Specifies the number of seconds
between call recording tones.
Valid values are 1 through 60.
Specifies the volume of the call
recording tone in 5dB steps.
Value Operation
• 0: The tone volume is equal to the
transmit audio level (default).
• 1: The tone volume is 45dB below
the transmit audio level.
• 2: The tone volume is 40dB below
the transmit audio level.
• 3: The tone volume is 35dB below
the transmit audio level.
• 4: The tone volume is 30dB below
the transmit audio level.
• 5: The tone volume is 25dB below
the transmit audio level.
• 6: The tone volume is 20dB below
the transmit audio level.
• 7: The tone volume is 15dB below
the transmit audio level.
• 8: The tone volume is 10dB below
the transmit audio level.
Table continues...
160