Configuring Certificates - Avaya J100 Series Installing And Administering

Configuring the phone using web interface
Name
Admin
Admin Access allowed from Phone
Admin Login fail attempt allowed
Admin Login Locked Time after fail
attempt
Related links
Configuring settings

Configuring certificates

Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Certificates.
3. Configure the following areas:
• Certificates
• Online Certificates Status Protocol (OCSP)
• SCEP
• PKCS12
• Web Server
4. Click one of the following:
• Save
• Reset to Default
• Help
Related links
Certificates field descriptions
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
Specifies whether the admin access is allowed from the phone.
The options are:
• No
• Yes
Specifies the number of failed attempts to enter the admin
access code before the admin login is locked.
The options are 1 to 20.
Specifies the time interval in minutes to re-enter the admin
access code after the admin login is locked.
The value is 5 to 1440 minutes.
on page 65
on page 73
Comments on this document? infodev@avaya.com
setup 72