Configuring Sip Settings - Avaya J100 Series Installing And Administering

Name
SCEP Password
PKCS12
PKCS12 Address
PKCS12 Password Retry Count
Available Identity Certificate
Upload Identity Certificate
Delete Installed Identity Certificate Allows you to delete any installed identity certificate.
Related links
Configuring certificates

Configuring SIP settings

Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click SIP.
3. Configure the following areas:
• SIP Account
• SIP Server
• Codecs and DTMF
• RTP
• Timers and Count
• Local Port
• Miscellaneous
4. Click one of the following:
• Save
• Reset to Default
• Help
Related links
SIP settings field descriptions
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• Wait until a certificate is received or rejected
Specifies a challenge password to use with SCEP.
Specifies the IPv4 or IPv6 URL address, or FQDN from where a
PKCS#12 file is to be downloaded.
Specifies the number of attempts allowed for password entry.
Specifies the trust certificates used as trust points for TLS
connections.
Specifies the trust certificates to be uploaded.
on page 72
on page 76
Comments on this document? infodev@avaya.com
setup
Configuring SIP settings
75