Avaya J100 Series Installing And Administering page 170

Appendix
Parameter name
SNTP_SYNC_INTERVAL
SNTPSRVR
SOFTKEY_CONFIGURATION
SPEAKERSTAT
SSH_ALLOWED
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
1440 minutes Specifies the time interval, in minutes,
Null
0,1,2
2
0
setup
Comments on this document? infodev@avaya.com
Description
Valid values contain 0 through 32
ASCII alphanumeric characters.
The default value is null. Null disables
SNMP.
during which the phone will attempt to
synchronize its time with configured
NTP servers. Valid values are from 60
to 2880 minutes.
Specifies a list of addresses of SNTP
servers.
Addresses can be in dotted-decimal or
DNS name format, separated by
commas without any intervening
spaces.
The list can contain up to 255
characters.
Specifies which feature will show up
on which softkey on the Avaya J129 IP
Phonescreens.
The features are defined as follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
Specifies the operation of the
speakerphone.
Value Operation
0: Speakerphone disabled
1: One-way speaker (also called
monitor) enabled.
2: Full (two-way) speakerphone
enabled.
Specifies if SSH is supported.
Value Operation
0: Disabled
Table continues...
170