Avaya J100 Series Installing And Administering page 166

Appendix
Parameter name
SIP_CONTROLLER_LIST
SIP_CONTROLLER_LIST_2
SIP_TIMER_T1
SIP_TIMER_T2
SIP_TIMER_T4
SIPCONFERENCECONTINUE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
Null
Null
500
4000
5000
0
setup
Comments on this document? infodev@avaya.com
Description
• 1: To display the last extension after
logout.
Specifies a list of SIP controller
designators, separated by commas
without any spaces. Controller
designator has the following format:
host[:port][;transport=xxx], where
host is an proxy address in dotted-
decimal or DNS name format. In third-
party call control setup, only DNS
format is supported.
[:port] is an optional port number.
[;transport=xxx] is an optional
transport type
In third-pary call control setup, only
one SIP controller is supported.
Specifies the registration address.
This parameter replaces
SIP_CONTROLLER_LIST for dual
mode phones. The parameter contains
a comma separated list of SIP proxy
or registrar servers. The list has the
following format: host[:port]
[;transport=xxx].
Specifies the time in milliseconds and
is an estimate of the Round Trip Time
(RTT).
Specifies the time in milliseconds and
is an estimate of the maximum
retransmit interval for non-INVITE
requests and INVITE responses.
Specifies the time in milliseconds and
is an estimate of the maximum
duration for a message to remain in
the network.
Specifies if a conference call
continues after the host hangs up.
Value Operation:
• 0: Drop all parties.
• 1: Continue conference
Table continues...
166