Avaya J100 Series Installing And Administering page 62

Configuring the phone using web interface
Name
Redirect Message Control
TCP
Send TCP Keep Alive Message
TCP Keep Alive Time
TCP Keep Alive Interval
Web Server
Web Server
HTTP Listen Port
HTTPS Listen Port
Use custom certificate for Web Server
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• Protocol and Port Unreachable messages
Specifies whether the ICMP redirect messages are
processed or not.
The options are:
• Yes
• No
Specifies whether the TCP/IP keep-alive messages
are enabled or disabled at the system.
The options are:
• Disable
• Enable
Specifies the wait time interval of the phone before
sending out the TCP keep-alive message (TCP
ACK message) to the far-end.
The valid time interval range is from 10 to 3600
seconds.
Specifies the TCP keep-alive packet re-
transmission interval
The valid time interval range is from 5 to 60
seconds.
Specifies whether the web server is enabled or
disabled.
The options are :
• Enable
• Disable
Specifies the port number of the web server when
the web interface is accessed using HTTP.
The default port number is 80.
Specifies the port number of the web server when
the web interface is accessed using HTTPS.
The default port number is 443.
Specifies whether to use the custom server
certificate when the web interface is accessed using
HTTPS.
setup
Comments on this document? infodev@avaya.com
Table continues...
62