Configuring the phone using web interface
Changing password
Procedure
1. Log in to the web GUI using your username and current password.
2. In the left pane of the screen, click Password.
The System section is displayed.
3. In the System section, enter your old password in the Old Password field, enter your new
password in the New Password field, re-enter your new password in the Confirm
Password field, and click Save.
• Your password must be between 8 to 31 alphanumeric characters including upper, lower
and special characters.
• Your password should contain at least 2 digits.
• Allowed special characters are ~!@#$%^&*_-+=`|\(){}[]:;'<>,.?/.
Configuring environment settings
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Environment Settings.
3. In the Environment Setting area, enable the following fields:
• AURA environment: To set Avaya Aura as your environment.
• Discover AVAYA environment: To discover whether the phone supports Avaya Aura
SIP AST feature.
• IP Office: To set IP Office as your environment.
• 3PCC environment: To set a third-party call controller as your environment.
Configuring date and time
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Date & Time.
3. In the SNTP area, configure the following:
• SNTP Server: Type the SNTP server IP address .
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
setup
Comments on this document? infodev@avaya.com
52