Avaya J100 Series Installing And Administering page 119

Parameter name
AGCHEAD
AGCSPKR
AUDASYS
AUDIOENV
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
1
1
3
0
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Value operation:
• 0: Disables AGC for the handset.
• 1: Enables AGC for the handset.
Specifies the status of Automatic Gain
Control (AGC) for the headset.
Value operation:
• 0: Disables AGC for the headset.
• 1: Enables AGC for the headset.
Specifies the status of Automatic Gain
Control (AGC) for the speaker.
Value Operation:
• 0: Disables AGC for the speaker.
• 1: Enables AGC for the speaker.
Specifies the audible alerting setting
for the phone.
Value operation:
• 0: Turns off audible alerting. User
cannot adjust ringer volume.
• 1: Turns on audible alerting. User
can adjust ringer volume, but cannot
turn off audible alerting.
• 2: Turns off audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
• 3: Turns on audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
Note:
Avaya J129 IP Phone does not
support this parameter.
Specifies the audio environment index
and enables you to customize the
phone's audio performance.
Valid values are 0 through 299.
This parameter affects settings for
AGC dynamic range and handset
noise reduction thresholds. Always
Table continues...
119