Avaya J100 Series Installing And Administering page 156

Appendix
Parameter name
PHY2TAGS
PHY2VLAN
PKCS12_PASSWD_RETRY
PKCS12URL
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
0
3
Null
setup
Comments on this document? infodev@avaya.com
Description
Determines whether or not VLAN tags
are stripped on Ethernet frames going
out of the Computer (PC) port.
Value Operation
• 0: Strip tags. VLAN tags are stripped
from Ethernet frames leaving the
computer (PC) port of the phone.
• 1: Does not strip tags. VLAN tags
are not stripped from Ethernet
frames leaving the Computer (PC)
port of the phone.
Note:
This parameter is configured
through the settings file.
Specifies the value of the 802.1Q
VLAN ID that is used to identify
network traffic going into and coming
out of the internal CPU of the phone.
Valid values are 0 through 4094.
Note:
This parameter is configured
through:
• SET command in a settings file
• LLDP
Specifies the number of attempts
allowed for password entry. Available
values are:
• 3: (Default)
• 0–100
Specifies the IPv4 or IPv6 URL
address or FQDN from where a
PKCS#12 file is to be downloaded.
Available values are:
• Null: (Default) Specifies that the
PKCS#12 identity certificate
download is disabled.
• 0–255 characters.
Table continues...
156