Step 2 : Turning ON the analyzer
Line Input Receptacle
Steps to turn on the power
4-4
Quick Start Guide
AC Power cable is connected to this receptacle.
Use the following fuse:
Fuse
Agilent Part Number : 2110-0030
(UL/CSA type, time delay 5 A 250 Vac)
If you need this fuse, contact your nearest Agilent Technologies Sales
and Service Oce.
1. Connect AC power cable to the line input receptacle
2. Turn on E5100A/B (need 30 minutes warm up).
Figure 4-3. Line Input Receptacle and Fuse