Link Parameters - Viavi T-BERD/MTS 2000 User Manual

Chapter 8 FTTH-SLM Software option
Configuring the Reflectometry test for FTTH network
If all the results lie within the thresholds (no result is in red), results are displayed in
green in the table and the icon is

Link parameters

In the Setup page, press Link softkey, or press Next if one parameter is selected in the
current screen until the Link Setup page displays.
The information entered in the Link Description window concerns the editing and/or the
modifications of the cable and fiber parameters. When a trace is recalled without recall
of the configuration, the parameters of this trace will be present only in its signature.
Test Point / OLT Id / ONT Id / Distribution Id / Feeder Id
Those parameters allow to enter an identification for each element of the network (test
point, OLT, ONT...) using the Edition menu.
Fiber Number
1 Select the parameter Fiber Number and modify the number of the fiber to be
tested.
The fiber number can be automatically incremented/decremented at each new file save
if it has been configured in the Change Fiber Nbr parameter (see
page 148).
Change Fiber Nbr
Increment
Decrement
No
User defined
Note: to decrement the number, enter the sign «-» before the number. Example: -
1.
Min: -999 / Max: 999 / Auto: 0
Technician Id
Use the arrow
Comment
Use the arrow
upper part of the screen.
148
the fiber number is automatically incremented at each new file-save.
the fiber number is automatically decremented at each new file-save
the Fiber number must not automatically modified.
Use Edit Number softkey to enter the increment/decrement value for
fiber number.
to enter the name of the operator carrying out the measurement.
to enter a comment, which will be displayed in the file signature, on the
User Manual
.
77000010208 Rev. 012
"Change Fiber Nbr"