Simple Otdr Testing (For Single Fiber); Managing Projects For Multi-Fibers Testing; Opening An Existing Project - Viavi T-BERD/MTS 2000 User Manual

Simple OTDR Testing (for single fiber)

The OTDR Enterprise Option can be use to test single fibers, with the optimum acquisi-
tion parameters automatically applied.
1 Select the OTDR Enterprise icon (MM or SM) and validate
2 From the results page, press S
3 In the Setup screen, press Load configuration to load an Enterprise SmartCon-
TM
fig
4 Select the file in the explorer and press Load as ENTERPRISE Config.
5 Modify / complete the parameters wished (see
on page
6 If necessary, press Save Config. to save the new configuration in a file , and
reuse it for other tests.
7 Press Start/Stop button to launch the acquisition for the fiber.
See Results for description of the results page.

Managing projects for multi-fibers Testing

The Enterprise OTDR option allows to generate projects in order to easily control and
document all test results.
Some existing projects are available on the Platform, and configured automatically. A
configuration file exist for each Fiber count (= connector type): Simplex, Duplex and
MPO cables.
A project may also be created by the user, with configuration previously defined.

Opening an existing project

Once the OTDR Enterprise icon is validated, the results page automatically opens:
1 Press Manage Project menu key
2 In the Explorer, select the project file to be used.
file.
172)
User Manual
Chapter 10 Enterprise-SLM Software option
Simple OTDR Testing (for single fiber)
button.
ETUP
"Configuring the Enterprise-SLM"
.
77000010208 Rev. 012
.
179