Viavi T-BERD/MTS 2000 User Manual page 136

Chapter 6 Power meter and Source options of the OTDR Modules
Terminated PON Powermeter (SmartOTDR only)
NOTE
The softkey Copy File/Link To all is displayed when one parameter is
selected in the Link or File Setup page and when the Powermeter or Source
function is active.
It allows to apply the Link and File configuration parameters of the current
applications to all the other active Fiber Optic applications).
The information entered in the Link Description window concerns the editing and/or the
modifications of the cable and fiber parameters. When a trace is recalled without recall
of the configuration, the parameters of this trace will be present only in its signature.
Test Point / OLT Id / ONT Id / Distribution Id / Feeder Id
Those parameters allow to enter an identification for each element of the network (test
point, OLT, ONT...) using the Edition menu.
Fiber Number
Select the parameter Fiber Number and modify the parameter using the left and right
direction keys.
The fiber number can be automatically incremented/decremented at each new file save
if it has been configured in the following parameter.
Change Fiber Nbr
Increment
Decrement
User defined
Note: to decrement the number, enter the sign «-» before the number.
Example: -1.
Min: -999 / Max: 999 / Auto: 0
No
Technician Id
Use the arrow
116
the fiber number is automatically incremented at each new file-save.
the fiber number is automatically decremented at each new file-save
Use Edit Number softkey to enter the increment/decrement value for
fiber number.
the Fiber number must not automatically modified.
to enter the name of the operator carrying out the measurement.
User Manual 77000010208 Rev. 012