Chapter 4 Configuring the reflectometry test
Configuring the test in Expert OTDR
Result storage
Filenaming
Select Filenaming parameter and press the right arrow key to modify the name of the
file for the result trace.
In the edition keypad, select the pre-defined parameters available or, press abc
key to enter a name manually for the file. Then, press Enter to validate.
Figure 24
Filenaming - Edition keypad (auto)
or
Press Default Filename to apply the name by default to the file:
Fiber[Cable_Id][Fiber_Num]_[Lambda]_[Direction]
The name of the file is displayed in grey under Filenaming parameter
File Content
In this parameter, select the file content for traces saving:
One Trace
All Traces
All By Laser
46
in case of traces in overlay, each trace is saved in a distinct file (.sor
extension).
in case of traces in overlay, all traces are saved in one single file
(.msor extension).
in case of traces acquired with different wavelengths, traces are
saved in one file by laser (.msor extension)
User Manual
77000010208 Rev. 012