Site Properties; Labeling - Viavi T-BERD/MTS 2000 User Manual

The Site Info Labels screen allows configuring the Site Properties and the Labeling.

Site Properties

In the Site Properties box, click on the right arrow key for each parameter to define the
Site Properties, the Technician Identification and the Job Identification.

Labeling

The Labeling box differs according to the configuration file loaded and currently used.
Label Format
This parameter displays the label format applied to the project according to the configu-
ration file selected.
Fiber Count (mandatory for project creation)
This parameter is available once the configuration file «ENTERPRISE_Custom_List.XX-
OTDR.fo_cfg» is loaded.
Select the right Fiber Count for the cables being tested:
• Simplex (single fiber strand)
• MPO
Fiber Prefix
Press the right arrow key to enter the prefix applied to the fiber, as an identification.
User Manual
Chapter 10 Enterprise-SLM Software option
Configuring the Enterprise-SLM
• Duplex (dual fiber strand)
MPO (8/12): 8 fibers used over 12
MPO (12/12): 12 fibers used over 12
MPO (20/24): 20 fibers used over 24
MPO (24/24): 24 fibers used over 24
77000010208 Rev. 012 175