Viavi T-BERD/MTS 2000 User Manual page 171

Once trace is displayed, you can:
• Zoom on trace (see
• Set Cursor A and/or Cursor B (see
• Save the traces and launch a report of results (see
generating a report" on page
Detailed description of an event
When clicking on one event icon in the results table, a popup window describes the
event type and provides a diagnosis to help troubleshoot faulty optical elements (indi-
cated in red).
Figure 88 Event description
Press S
ETUP
before launching a new acquisition.
Multi-pulses traces
In case of multi pluses traces, the display is simplified to handle traces: only the "useful"
traces and sections (cut section of traces) are displayed.
Ex: The 7 events detected in the example below are coming from 3 acquisitions, a
combined trace is created showing only the 3 useful sections.
"Zoom function" on page
hard key to go back to FTTH Setup screen and modify the parameters
User Manual
Chapter 8 FTTH-SLM Software option
51).
"Cursors" on page
157)
77000010208 Rev. 012
Results page
50).
"Saving the trace(s) and
151