Changing The Name Of An Event - Viavi T-BERD/MTS 2000 User Manual

Chapter 7 FTTA-SLM Software option
Results page
In this view, an algorithm automatically detects the elements of the FTTA link and
label them.
2 Select the event to be described on the graphic (highlight in yellow).
The corresponding event description is displayed on the Zone 3, with a recall of
alarm threshold for this event:
Figure 80 SmartLink: Event View
3 Click on Trace View to display the selected event in the results table and zoomed
on trace.
NOTE
The event is framed in red if it is above the alarm thresholds defined in the
setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined for this type of event.

Changing the name of an event

Once the SmartLink screen is displayed, the name of an event can be modified:
1 Select the event to be modified (highlighted in yellow)
2 Press Rename Event menu key
3 In the edition keypad, enter a new name for the event
136 User Manual 77000010208 Rev. 012
.