Viavi T-BERD/MTS 2000 User Manual page 129
Otdr functions, options and software applications
Hide thumbs
Also See for T-BERD/MTS 2000:
- Quick start manual (3 pages) ,
- Quick card user manual (4 pages)
Table of Contents
Advertisement
Figure 62
Side by side reference
T-BERD/MTS / SmartOTDR (1)
OTDR
Source
NOTE
The reference can be performed with one T-BERD/MTS 2000 at one side
and one T-BERD/MTS-4000 V2 at the other side.
1
Before connecting fiber/jumper, use appropriate cleaning tool to clean connector
end-faces.
2
Connect the two jumpers together via a bulkhead connector.
3
Set, on equipment (1), the OTDR light source as "Standard Ref"
a
b
c
d
e
f
g
109
Chapter 6 Power meter and Source options of the OTDR Modules
Press the H
key
OME
Use the arrow keys or touchscreen to select the Source function on Home
page
.
Press R
key
ESULTS
In the Results page, press Source Config.> Source Reference > Stan-
dard Ref
Press Exit and go back to the result Page
Select the Twintest mode by skipping through the different modes
Press Laser On key to activate the source
User Manual
Performing the insertion loss measurement
T-BERD/MTS / SmartOTDR(2)
Bulkhead
connector
Jumpers
77000010208 Rev. 012
Mainframe, USB or
OTDR module
Power meter
Advertisement
Table of Contents
