Changing The Type Of An Event - Viavi T-BERD/MTS 2000 User Manual

2 Select the event to be described on the graphic (highlight in yellow).
The corresponding event description is with a recall of alarm thresholds.
Figure 93 SmartLink: Event View
3 Click on Trace View to display the selected event in the results table and zoomed
on trace.
NOTE
The event is framed in red if it is above the alarm thresholds defined in the
setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined for this type of event.

Changing the type of an event

Once the Event View is displayed, the type of event can be modified:
1 Select the event to be modified (highlighted in yellow)
2 Press Event Code menu key
3 Click on the event type to be applied to the selected event:
User Manual
Chapter 8 FTTH-SLM Software option
77000010208 Rev. 012
Results page
155