Activating The Source Function; Result Page; Result Page Of The Power Meter - Viavi T-BERD/MTS 2000 User Manual

• Attenuator compensation
NOTE
To copy a Reference Level/Attenuator Compensator on all wavelengths,
select the reference wavelength and click on

Activating the Source function

The Source function is an option chosen at the time of order and incorporated into the
OTDR module in the factory.
To activate the function:
1 Press the H
2 Click on the icon Source in the OTDR Section.
The icon turns yellow
CAUTION
The Singlemode and Multimode Source icons cannot be selected at the
same time. When one is selected, it automatically deselects the other one.

Result page

The results page, automatically displayed after the icon selection, gives the information
relating to the measurement in progress, results previously saved and the commands
available for measurement and saving.

Result page of the Power meter

The power measured by the power meter is displayed in large characters, in the units
selected in the
103
Chapter 6 Power meter and Source options of the OTDR Modules
Choice of level to be applied to the wavelength chosen for
measurement to compensate for the loss due to the external
attenuator (+XX.XX dB). First use the direction keys to choose
the wavelength, then press
confirm this value pressing E
button.
OME
Setup menu, together with:
User Manual
NTER
.
77000010208 Rev. 012
Activating the Source function
to access choice of value, then
.
Update for All Wavel..