Connection To The Power Meter; Configuring The Power Meter - Viavi T-BERD/MTS 2000 User Manual

Chapter 6 Power meter and Source options of the OTDR Modules

Connection to the power meter

Connection to the power meter
Figure 57 Optical connector for the Powermeter or Source on the OTDR Module (T-
BERD/MTS 2000/4000 V2)
The type of optical connector used for the power meter is the same as the OTDR port.
With 2 OTDR ports, select the port of connection according to the wavelength available
at each port (a label gives information at the back of the OTDR module).
It is not possible to use simultaneously the Source function and the
Power meter function, when both options are set onto the OTDR mod-
ule, as they use the same connector.

Configuring the Power meter

For T-BERD/MTS 2000/4000 V2, the power meter function is an option chosen at the
time of order and incorporated into the OTDR module in the factory.
To activate the function:
1 Press the H
100
Connector
button
OME
User Manual 77000010208 Rev. 012