File Signature - Viavi T-BERD/MTS 2000 User Manual

It is possible to open a file even if the corresponding module is not present in the instru-
ment. A new tab then temporarily manages this application.
When several different applications (corresponding to modules for different measure-
ments) are managed by the SmartOTDR, pressing the F
sion changes from one tab to another to give access to the file configuration of the
desired application (e.g. FCOMP, LTS etc.).

File signature

The acquisition parameters of the trace contained in the selected file are displayed at
the top of the screen together with a small-scale representation of the trace (provided it
was acquired on a MTS / T-BERD).
Figure 137 Example of signature of an OTDR file (in the File Menu)
Module used for
acquisition
Mini-trace
Figure 138 Example of signature with FCOMP file
Measurement
parameters
Module used
Pulse width
Laser
Fiber Id
Resolution
Acquisition time
Fiber Id
User Manual
Fiber Number
Origin / End
Refraction Index
Fiber Number
Cable Id
77000010208 Rev. 012
Chapter 12 File management
Description of the explorer
key several times in succes-
ILE
Pass / Fail indicator
Date of acquisition of
the signal
Pass / Fail
indicator
Origin / End
Date of acquisition
221