Modifying Some Parameters Before The Acquisition - Viavi T-BERD/MTS 2000 User Manual

Figure 13 Load file as Smart Test Configuration
3 Once loaded, the configuration parameters that can be modified displays.

Modifying some parameters before the acquisition

In Smart Test mode, the user have access to 4 parameters he can modified before
launching the test.
Figure 14 Smart Test Setup page
• Laser The acquisition will be carried out on the wavelength(s)
selected (for multiple-wavelength modules). In case of a multi-
wavelength module, select All to perform a measurement for
User Manual
Chapter 4 Configuring the reflectometry test
Configuring the unit for Smart Test
77000010208 Rev. 012
Location of the
configuration files
for Smart Test
23