NOTE
In the case a Singlemode/Multimode module, one line contains the Multi-
mode icons and a second one the Singlemode icons.
To distinguish both modes, multimode icons contain the MM mark.
Selecting the OTDR Expert function
Principle of the OTDR Expert
The OTDR Expert is used to
•
perform OTDR acquisitions with full OTDR setup capabilities, and advanced anal-
ysis features.
•
create configuration files that can be loaded by Smart Test users.
Selecting OTDR Expert
The OTDR Expert function is available whatever is the OTDR module set onto the MTS/
T-BERD or whatever is the SmartOTDR used.
To select this function, after the equipment start:
1
Press the H
2
Select the OTDR Expert icon
The icon turns yellow
After a few seconds, the Results page displays.
NOTE
The selection of OTDR Expert icon automatically deselects the Smart Test
icon and vice-versa.
NOTE
In the case a Singlemode/Multimode module, one line contains the Multi-
mode icons and a second one the Singlemode icons.
To distinguish both modes, multimode icons contain the MM mark.
button
OME
.
User Manual
Chapter 3 Activating OTDR function
Selecting the OTDR Expert function
.
77000010208 Rev. 012
19